Sockets need to be installed at least 450mm up from the floor level of a room. TV points, telephone points, doorbells and light switches should be a max height of 1200mm from the floor. Electrical sockets, switches and other electrical control devices should be a minimum of 350mm from corners of a room.
Contents
- 1 What height should sockets and switches be?
- 2 How high should sockets be above worktop?
- 3 Do light switches have to be a certain height?
- 4 What is the minimum height for a light switch?
- 5 How high should sockets be above skirting?
- 6 Where should electrical sockets be placed?
- 7 What height should a plug socket be UK?
- 8 How high should electrical outlets be in a kitchen?
- 9 What height are electrical sockets?
- 10 What is code for switch height?
- 11 What should be the height of a single pole switch?
- 12 What is the standard height of a switch?
- 13 How high should an outlet be in a bathroom?
- 14 What is the maximum height of an electrical panel?
- 15 What is the ADA mounting height for a receptacle?
What height should sockets and switches be?
As a general rule of thumb sockets should be installed at least 450mm to 1200mm up from the floor level of any room. Of course, if the house has been adapted or requirements are different, then you may need to install the sockets at a different height.
How high should sockets be above worktop?
The standard height of a worktop from the floor to the worktop surface is 910mm. The general rule is to then set your sockets 150mm above this (measured from the worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.
Do light switches have to be a certain height?
So what height do light switches have to be in a home? For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. Although 48 inches is the standard height electricians prefer for most rooms, this can be altered if local building codes permit.
What is the minimum height for a light switch?
The height from the floor to the middle of the switch plate should not exceed 48 inches, and the minimum height should not be less than 15 inches. When the switch is over a counter that has a knee space, and the counter depth exceeds 20 inches, the maximum height of a switch is reduced to 44 inches.
How high should sockets be above skirting?
I always put the sockets on rewires at 2 to 3 inches above the exiting height of the skirting boards.
Where should electrical sockets be placed?
In other locations, power sockets are usually placed at a height of 15 to 20 cm above the finished floor surface. However, if you would like your home to be adaptable to changing needs then you should place them 40 to 50 cm above the floor. Elderly people will especially appreciate not having to bend too far down.
What height should a plug socket be UK?
Sockets need to be installed at least 450mm up from the floor level of a room. TV points, telephone points, doorbells and light switches should be a max height of 1200mm from the floor. Electrical sockets, switches and other electrical control devices should be a minimum of 350mm from corners of a room.
How high should electrical outlets be in a kitchen?
Kitchen receptacles install above the backsplash of counter tops. This makes the correct height about 43 inches from the bottom of the box to the floor.
What height are electrical sockets?
In new dwellings only, switches and socket-outlets for lighting and other equipment should be between 450mm and 1200mm from finished floor level. Consumer units should be mounted so that the switches are between 1350mm and 1450mm above floor level.
What is code for switch height?
Many builders position switch boxes so the bottom of the box is 48 inches above the floor. To satisfy the accessibility requirements of the Fair Housing Act, however, the switch itself should be no more than 48 inches from the floor. To be accessible from a wheelchair, switches over cabinets should be lower.
What should be the height of a single pole switch?
As from the given option ideal height of a single-pole switch is 1.5 m. Socket-outlets shall be installed either 0.25 or 1.3 m above the floor as desired. The clearance between the bottom point of the ceiling fan and the floor shall be not less than 2.4 m.
What is the standard height of a switch?
Wall Switches in Standard Construction Typically, light fixture wall switches in standard residential construction are set so that wall switch boxes are somewhere between 48 and 52 inches above the floor.
How high should an outlet be in a bathroom?
There are no set rules for the height of receptacles on walls or over counters, even in a bathroom. Good practice is to keep them at least 4 inches above a counter top or backsplash and not directly over a sink or under a window.
What is the maximum height of an electrical panel?
The top of the panelboard is 84 inches (7 feet) above the floor. In this installation, no circuit breaker (in its highest position) is more than 6 feet, 7 inches above the floor.
What is the ADA mounting height for a receptacle?
American Disabilities Act Requirement. The Code of Federal Regulations 28 Part 36 (American Disabilities Act) in Section 4.27. 3 states that electrical and communications system receptacles on walls shall be mounted no less than 15″ above floor.
