Readers ask: How Do You Turn On A Jason Jacuzzi?

This touchpad system provides a safe and convenient method for controlling your whirlpool bath while bathing. The whirlpool pump’s On / Off switch is operated by simply touching the control touchpad’s Jet/Timer key. An indicator light on the touchpad will illuminate when the pump is On.

How do I start Jason whirlpool?

PUMP ON / OFF WHIRLPOOL CONTROL All Jason Integrity™ Whirlpool baths are provided with an air switch conveniently located for the bather operation. This air switch controls the pump On/Off functions. To start and stop the whirlpool pump, simply momentarily press and release the air switch button.

How do I turn on my Jacuzzi tub?

How to Operate a Whirlpool Bathtub

  1. Set the water temperature for your bath.
  2. Fill the tub with water set to your temperature preference.
  3. Climb into the whirlpool bathtub carefully.
  4. Press the “On/Off” control on the side of the tub to turn on the pump and start the whirlpool jets.

Why will my Jacuzzi tub not turn on?

If your home has experienced a recent power surge or power outage, you may need to head to the breaker box and check to see if the control for your jetted tub is turned to the “off” position. If so, simply turn it back to the “on” position. The fix may be as simple as cleaning or replacing the tub’s filters.

You might be interested:  What is the closest state to africa

How do you turn on a Jacuzzi without the button?

Once it is full to that level, simply touch a quarter sized sensor located on TOP of the tub in the front left of the hot water valve. This button does not move, simply touching it will turn the jacuzzi pump on or off. Thanks for your replies and questions.

How do you clean a Jason air tub?

1) Close the drain and fill bath with warm water to approximately 4″ above the air inlet holes. 2) Pour all of the Jason Bath System Cleaner (16 oz.) into the bath, in accordance with the directions on the bottle. Bleach may also be added as indicated on the bottle.

Can jacuzzi turn on without water?

This means no water flow no heat. The only damage you could have had would be if the pump was on with no water. A hot tub is not like a water heater. It is only heating flowing water and not standing water.

What are the knobs on my Jacuzzi tub?

Water Control Generally, in the form of manual knobs, there are electric versions, but the idea is that the water knobs control the speed and pressure of the jets. Some of these are tied and linked to your electric water pump.

How do you turn off a Jacuzzi tub?

If you have massage jets running with therapy pumps and the standard circulation jets you might have a button that says: Jets 1, Jets 2, and Jets 3. To toggle the pumps on and off, simply press the jets you would like turned off. That will switch off the therapy pump you indicated.

You might be interested:  FAQ: What Do You Do With A Broken Fridge?

How do I reset my Jacuzzi?

How to Reset a Spa Heater

  1. Locate the spa’s high-limit reset. This is a red button found on many spa packs.
  2. Press the high-limit reset button.
  3. Turn on your spa and observe its operation.
  4. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.

How does a Jacuzzi air switch work?

An air switch consists of a pneumatic air button located at spa-side and a pneumatic-activated electrical, air switch located with the spa electronics. This arrangement eliminates the shock hazard of activating a regular switch energized with 120 volts or 220 volts with wet hands while submerged in water.

Written by

Leave a Reply

Adblock
detector