Somewhere on your electric water heater, you’ll find a reset button. It’s usually red and often located near the thermostat. It may also be hidden behind a removable metal panel on the unit—and then behind some insulation. If your water heater now has power, you’re all set.
Contents
- 1 What trips the reset button on a hot water heater?
- 2 Why can’t I reset my water heater?
- 3 Where is the reset button on a gas hot water heater?
- 4 What to check when there’s no hot water?
- 5 What would cause a hot water heater to stop working?
- 6 What causes a water heater to need to be reset?
- 7 Why would a hot water heater need to be reset?
- 8 Why do I have to keep resetting water heater?
- 9 When should you hit reset button on water heater?
- 10 Where is my water heater breaker?
The high resistance caused by a loose wire produces a substantial amount of heat that can eventually cause fires. If there is a loose electrical connection within your water heater’s system, your reset button’s thermometer can trip (regardless of the water’s temperature) if it picks up the heat from that loose wire.
Why can’t I reset my water heater?
What do you do if the water heater reset button doesn’t reset? You might have a faulty thermostat. If the hot water heater keeps tripping the reset button, the cause may be the high limit switch. What’s happening is that the thermostat is not properly managing the heat.
A water heater reset button, usually red, is located in the center of the limit switch just above the water heater thermostat. The water heater limit switch is a safety device that will shut the power down to the water heater if something malfunctions and the water gets to hot.
What to check when there’s no hot water?
If there is no hot water or the supply is not adequate or is too hot, check the upper thermostat. If the thermostat is busted, it should be replaced. Lack of regular maintenance can cause issues even though the thermostat is working because of sediment buildup. To fix this, flush your water heater.
What would cause a hot water heater to stop working?
If an electric water heater is not producing hot water, it could be a simple problem like a blown fuse or tripped circuit breaker. Other simple solutions include an unplugged or faulty power cord for electric water heaters. For gas water heaters, it could be as straightforward as being out of gas.
What causes a water heater to need to be reset?
A bad thermostat One common thermostat problem with electric water heaters occurs when the lower thermostat becomes “stuck” in the ON position and doesn’t cycle the lower element off properly. When this happens, heat builds up in the upper portion of the storage tank, which will eventually trip the reset button.
Why would a hot water heater need to be reset?
If your water heater loses power, your water heater’s reset button can be used to turn the appliance back on. However, your reset button serves as a safety device and turns the unit off when the water temperature gets too hot.
Why do I have to keep resetting water heater?
The reset button usually trips for safety to prevent the tank from overheating and potentially becoming a bomb. If your heater is continuously tripping you should call a Orlando plumbing company to replace the thermostats. We usually recommend replacing all old components with new parts this includes the elements.
This article has been viewed 71,114 times. If your water heater stops producing warm water, resetting the heater will usually solve the problem. As long as you can find the water heater and identify the reset button, the process is simple.
Where is my water heater breaker?
Most water heaters will have a two pole breaker. This breaker should be marked in your panel. It will usually be between 30 and 50 amps. Turn off the power at the breaker panel.
