To use a cable auger, take the following steps:
- Align the end of the snake into the drain and push it inside.
- Keep turning the handle until you feel that the snake has reached an obstruction.
- Keep on rotating the snake so it breaks the blockage apart.
•
Contents
- 1 How do you use a snake auger?
- 2 How do you unclog a toilet with an electric snake?
- 3 Can a drain snake break a pipe?
- 4 What is the difference between a snake and an auger?
- 5 How do you get a drain snake past a trap?
- 6 How do you snake an outside drain?
- 7 Can you run a power snake through a toilet?
- 8 How do you unblock a badly clogged toilet?
- 9 How do you fix a slow draining toilet?
How do you use a snake auger?
Steps for using a drain auger
- Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake.
- Keep pushing more of the snake into the drain until you feel resistance.
- Rotate the snake against the blockage until you feel it feed freely into the pipe.
How do you unclog a toilet with an electric snake?
Place the end of the auger into the toilet bowl so that it points down the drain. Turn the handle clockwise to extend the auger’s cable (or “snake”) down into the drain towards your clog.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
What is the difference between a snake and an auger?
Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range. When they do, it’s often from roots growing into the pipes.
How do you get a drain snake past a trap?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
How do you snake an outside drain?
Overview of Steps
- Locate and clean around the outside of the cleanout plug to keep leaves and dirt from falling into it.
- Place the root cutting head of the auger in the cleanout access and turn on auger’s power.
- Feed the auger cable into the drain until resistance can be felt as it meets and begins to cut at roots.
Can you run a power snake through a toilet?
Clogged and slow drains pose a problem for any homeowner. The best method of clearing a clog is a plumber’s snake. Running a long snake into a toilet or other drain can work to clear the clog but may be difficult. Plumber’s snakes can be used on internal or external drain pipes.
How do you unblock a badly clogged toilet?
How Do You Unblock a Badly Clogged Toilet?
- Try Soap. Dish soap serves as a kind of lubricant to loosen the clog and dislodge the debris.
- Try a Different Plunger.
- Try a Coat Hanger.
- Try Dissolving the Clog.
- Try a Plastic Bottle.
- Try Vinegar and Baking Soda.
- Toilet Still Won’t Unclog?
How do you fix a slow draining toilet?
Make sure there is no drain buildup: To figure out if the drain (or its trap) is clogged try swiftly pouring about a gallon of water into the toilet bowl. If the water level that is in the bowl rises very quickly, then there is a clog somewhere in the pipe line. To fix this problem try using the handy dandy plunger!
