Question: How Many Sq Ft Does A Gallon Of Stain Cover?

On average most deck stains cover 150-300 sq. ft. per gallon depending on the age, condition, and porosity of the wood.

How many gallons of stain do I need for 1000 square feet?

Divide the total square feet of fence to be stained by the coverage listed on the can. For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence.

How much stain do I need for a 10×10 deck?

How Much Stain Do I Need For My Deck? For decks and patios that measure up to 175 square feet, you will only need one gallon of stain, in any transparency. If your deck or patio measures up to 550 square feet, you will need to buy 2 gallons of stain.

How much does a gallon of stain cover on a deck?

Deck stains provide 200 to 300 square feet of coverage per gallon. You’ll need 2 gallons of stain to cover a 500 square foot deck. Coverage depends on the stain brand, type, and the wood’s age, condition, and porosity.

How much stain does it take to stain a fence?

For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.

How many sq ft is 12×12?

How many square feet is a 12×12 room? The square footage of a room 12 feet wide by 12 feet long is 144 square feet. Find the square footage by multiplying the width (12 ft) by the length (12 ft).

How much area does a quart of stain cover?

Polyurethane and varnish- 125-150 sq. ft./ qt. Spray Paint- 8-10 sq. ft./8 oz.

How many coats of stain should you put on a deck?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain.

How do you estimate deck staining?

Simply put, the cost of a deck staining job is directly proportional to the deck’s size. For this reason, most estimates are broken down to square footage — generally speaking, deck staining itself runs about $2-$5 per square foot, sanding costs somewhere between $1-$3 per square foot, power washing around $0.15/sq.

How much stain do I need for 400 square feet?

Divide the total square footage of the area you want to stain by the square footage covered by a can of your chosen stain. Round the result up to the next whole number. For example, if you have 400 square feet of floor to cover and a can of stain covers 220 square feet, you need two cans of that stain.

How much does it cost to stain a deck per square foot?

The cost to stain your deck typically ranges from $540 to $1,050 with an average of just over $700. This equates to an average cost of $2 to $4 per square foot for labor and materials. Higher-quality stains will run up the price, as will washing or sealing the wood prior to staining.

Should I pressure wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Why is Minwax stain still tacky?

If you applied the stain correctly, and it still remained tacky, it could be due to rainy weather or high humidity. In either case if the tackiness doesn’t go away, wipe the wood down with mineral spirits or naphtha to remove most of the stain, let it dry thoroughly, then try again using a fresh can of stain.

How long does Minwax stain need to dry before polyurethane?

In general, you should wait between 24-48 hours for the stain to dry before polyurethane. If you don’t want to take any chances or think the stain might not be dry enough, wait an extra day before applying poly. 6

Do you have to put polyurethane over stain?

Do I have to apply a clear coat after staining? While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection. A polyurethane top coat protects the wood from scratches, stains and water damage.