Question: Why Are Cordless Circular Saws Left Handed?

The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Circular saws that are 6.5 inches or smaller are usually left-handed in design.

Why do cordless circular saws have the blade on the left side?

Traditionally, all worm drive saws operated in a blade-left orientation. Furthermore, this orientation likely places the weight of the saw over the portion of the material the user wants to keep, making it easier to stabilize the saw during the cut.

Should circular saw blade be on left or right?

Many woodworking professionals who use circular saws daily prefer to work with one hand while holding the wood steady with the other. To be able to work like this, you need to have the blade on the left so you can hold the saw with one hand, hold the wood with the other and watch the blade all at the same time.

Can a right handed person use a left-handed circular saw?

Whether you are right handed and use a left handed circular saw or left handed and use a right handed circular saw, it’s all still up to you. Whichever one you decide to buy should be the one you feel most comfortable working with. Of course, you may not have a preference and are comfortable with both types of saws.

Can you put a circular saw blade on backwards?

When cutting vinyl siding with a circular saw, install a fine-toothed blade backwards on the saw for a smoother, cleaner cut, especially in cold weather (when the material is brittle).

Do they make left-handed power tools?

Many power tools and machines can be used with either hand, but some are simply made for right-handed people. Fortunately, left-handed circular saws and other power tools are available.

Is there a left-handed chainsaw?

Unfortunately, there is no such thing as a left-handed chain saw. Left-handed persons should hold the chain saw in the same manner as a right-handed person would hold it. Your body should be in such a position that you have control over your balance.

Does Dewalt make a left handed circular saw?

This 7 1/4″ saw is just a cordless version of the corded right side sidewinder. And Dewalt makes a left side blade circular saw that is basically a cordless worm drive if you need that bid of a saw to have the blade on the left side. 3 of 3 found this helpful.

Why is it called a worm drive saw?

What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.

Which way do the teeth face on a circular saw?

When installing a new blade, make sure the teeth are pointing downward to enable a clean cut through the workpiece. Upward-facing teeth can cause a severe injury to the operator.

Do they make a circular saw for left-handed people?

There are some brands, such as Milwaukee, that offer both right- and left-handed saws. Cordless circular saws are typically left-handed as well.

What are the advantages of a worm drive circular saw?

Advantages of a Worm Drive Circular Saw The longer distance between the handle and the blade extends your reach while making a cut, which is helpful for crosscutting sheet goods. A worm drive also has larger gear teeth with more load-carrying capacity than a direct drive, which provides more power but also adds weight.

What is the difference between worm drive and Sidewinder?

A sidewinder, as the name implies, has the motor on one side of the saw. A worm-drive motor is at the rear of the saw, and its power is transferred to the blade with a pair of gears that are oriented at a 90 degree angle. Obviously, this motor position leads to a longer saw, but it’s also significantly heavier.

Why do circular saws cut upwards?

The teeth of circular saw blades are intended to cut upwards into the material from below and this is for safety purposes. It is important that you should not spin them in a different direction just like you spin a table saw blade.

Can you turn a wood blade around to cut metal?

Not only will you need a different blade for cutting metal than you would for cutting wood, but a metal-cutting blade should not be used in the same saw as the type used for wood. If you do decide to use a wood saw on metal, only use a 7 1/4-inch blade and preferably a worm drive blade, which provides extra torque.

What happens if you put a chainsaw blade on backwards?

Unfortunately the chain will go on either way, but if you put it on backwards, it will not cut. Remember, when holding the chainsaw, the cutting portion of the blade should be facing away from you, traveling from the back of the chainsaw to the front tip of the chainsaw.