Question: What Is Prep Sol?

A cleaning solvent specifically designed to remove wax, grease, silicone, dirt, tar, insect remnants, road film and pinstripe adhesives from the surface.

How do you use Prep Sol?

Soak a clean cloth with Prep-Sol® 3919S™ Cleaning Solvent. Wipe surface to loosen and lift the contaminants; follow immediately by wiping thoroughly with a clean dry cloth. Local air districts may require the use of atomizing spray bottles for the application of cleaning solvent.

What is Prepsol used for?

PREPSOL is a grease, wax and silicone remover. PREPSOL is suitable for spray painting shops and vehicle detailers. Spray or wipe PREPSOL on to surfaces to be cleaned. Use a clean lint free wipe (like Sontara Wipes) or cloth for final polish.

What is paint prep solvent?

2 oz Prep Solvent This product removes oils, road grease, dirt, car wax, and other surface contaminates. For use with touch up paints, spray paints, and ready to spray paints for use with a spray gun.

What is prep cleaner?

A Liquid Non Solvent cleaner, aqueous-based cleaner, Prep Cleaner removes dirt, grime and oil when readying surfaces for interior auto paint. Great for everything from leather to soft plastics, it’s been engineered to remove compounds and releasing agents that typically spoil most interior paint jobs.

What should I clean metal with before painting?

To properly prepare new metal surfaces, use mineral spirits to remove grease and apply a rust-inhibitive primer before painting. For painted surfaces that are in sound condition, remove dust with a clean, dry cloth, de-gloss the surface with light sanding, and wipe with mineral spirits to ensure good adhesion.

Can you use acetone to prep for paint?

To prep and paint metal you’ll need shop rags, acetone, scuffing pad, self-etching primer, and your choice of spray paint. Don’t forget to wear gloves, eye protection, and a respirator mask.

Is wax and grease remover the same as Prepsol?

Wax & grease remover also known as prepsol is a mixed hydrocarbon. Wax & grease remover is perfect within the automotive industry as it has such a beautiful finish. It allows the paint to bond effectively to the surface, which means for a smoother outcome with no residue left.

Can you paint over wax and grease remover?

IMPORTANT: Every part of any surface to be painted must be cleaned with a wax and grease remover product prior to the application of paint. If you don’t use such a type of auto surface cleaner, you run the risk of contaminants on the surface ruining an otherwise professionally applied paint job.

Is prep all safe on paint?

You must not use this grease and wax cleaner on freshly painted surfaces. Adhere to the paint cure times before you use this product on top of paint coats.

Can you use rubbing alcohol for paint prep?

When properly diluted, isopropyl alcohol removes polishing oils and fillers, enabling you to see the true condition of your vehicle’s finish. Isopropyl alcohol, when diluted accordingly, can also be used to prep surfaces for paint, glass or wheel coatings. A common dilution ratio for this is between 10 and 15%.

Can you use mineral spirits for paint prep?

Mineral spirits are perfect to clean and prep even the toughest surfaces for painting. If you need to remove paint from an old piece of wood furniture, mineral spirits will get the job done while preserving the wood better than acetone or other stripping methods.

How do you use ColorBond prep cleaner?

Using ColorBond Prep Cleaner is simple: Clean the surface thoroughly. Apply ColorBond Prep Cleaner with clean, tack free cloth. After cleaning with Prep Cleaner:

1. Dry the component completely.
2. Shake the can for 60 seconds before application.
3. Apply ColorBond Adhesion Promoter.
4. Apply heat (recommend 10 minutes at 140 – 250° F)

How do you use TSP before painting?

To clean walls with TSP, mix the powder into a bucket of warm water until it’s completely dissolved (be sure to wear rubber gloves and goggles for protection). Dip a sponge into the TSP solution and use it to wipe down walls. Rinse the surface with clear water and let dry before painting.

What is in panel wipe?

Panel wipe, also known sometimes as panel prep, is traditionally a solution made up of distilled water and Isopropyl Alcohol. Panel wipe is often known as an IPA wipe because of the main active ingredient being Isopropyl Alcohol.