Let topcoat dry to the touch, approximately 1–2 hours at 70°F (21°C) and 50% RH. When last coat has dried to the touch, inspect final surface for pinholes, voids, thin spots or other defects. HYDRO BAN will dry to an olive green color when it’s dry to touch.
Contents
- 1 Can you tile over HYDRO BAN?
- 2 Can you paint over HYDRO BAN?
- 3 What’s the difference between HYDRO BAN and hydro barrier?
- 4 Is HYDRO BAN better than redguard?
- 5 Is Redgard a vapor barrier?
- 6 Can you paint over shower waterproofing?
- 7 What is HYDRO BAN used for?
- 8 What is Hydro Ban Board?
- 9 Is laticrete waterproof?
- 10 What is laticrete used for?
- 11 Is Spectralock waterproof?
Can you tile over HYDRO BAN?
Tile can be installed on HYDRO BAN Sheet Membrane immediately after installation with LATAPOXY 300 Adhesive or any suitable tile installation mortar.
Can you paint over HYDRO BAN?
Yes you can, but if the hydroban is applied roughly the paint will show it.
What’s the difference between HYDRO BAN and hydro barrier?
The key difference is Hydro Barrier requires fabric to be used in all the corners and seams while Hydro Ban does not. There is also a color difference – Hydro Ban is sage color and will dry to an olive green color while Hydro Barrier is a light blue and will dry to a dark blue color.
Is HYDRO BAN better than redguard?
One major difference if you do your research online is that Redgard is certified for use in steam rooms and as a vapor barrier whereas Hydro-ban is not. Both have the certification for pan liners and waterproofing, but Redgard outperforms Kerdi membrane (not Kerdi DS) in Perms of vapor penetration.
Is Redgard a vapor barrier?
It bonds directly to clean metal drains, PVC, stainless steel and ABS drain assemblies and can be used as a slab-on-grade moisture vapor barrier under all types of floor coverings. RedGard® is a liquid-applied elastomeric waterproofing material that cures to form a monolithic membrane.
Can you paint over shower waterproofing?
Painting your waterproof membrane may not be warrantied, but it is possible. Remember that you will have to use a good quality primer or an all-in-one paint for the best chance at success with your fresh coat of paint.
What is HYDRO BAN used for?
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.
What is Hydro Ban Board?
HYDRO BAN® Board is a lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations. It is made with a high-density, waterproof extruded polystyrene core and a reinforced, waterproof membrane on both sides to give triple protection from water and vapor intrusion.
Is laticrete waterproof?
LATICRETE® tile waterproofing membrane products provide protection for floors and walls for applications ranging from occasionally wet, to continuous water submersion as in showers or pools. Our shower waterproofing membrane has been industry tested to withstand the test of time.
What is laticrete used for?
The ultimate, lightweight one-step, polymer fortified, Large and Heavy Tile mortar for interior and exterior installation of ceramic tile, porcelain tile, glass tile, stone, quarry tile, pavers and brick.
Is Spectralock waterproof?
Yes, SPECTRALOCK 1 is suitable for wet and submerged areas including Swimming Pools (salt water and chlorinated), fountains, spas, and shower areas. See datasheet (DS-36589) for more information. 5.
