Question: What Kind Of Plywood Do You Use For Subfloor Under Tile?

Exterior plywood is an acceptable underlayment for tile and is preferred to interior-grade plywoods because the bonding adhesives used are waterproof. If water seeps through the tile installation to the underlayment, it will not cause the wood to swell, as happens with interior-grade plywood.

What kind of plywood do you use for tile subfloor?

Tip: Make sure the subfloor will not deteriorate when it gets wet. Particleboard is not an acceptable subfloor material for tiling projects. Oriented strand board (OSB) and exterior-grade plywood will work if first covered with a latex-modified mortar and a tiling backer board.

How thick should plywood subfloor be for tile?

The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

Does a plywood subfloor have to be 100% level for installing ceramic tile?

Before installing tile on your floor you must make sure your floor is properly prepared. A properly prepared floor does not have to be level.

What thickness plywood should I use for bathroom flooring?

Consider what the top layer of the bathroom flooring will be since some types of plywood are better suited for different flooring. For hardwood, tongue-and-groove CDX plywood rated AC with a 1/2- to 3/4-inch thickness is best. Specifically for subflooring, tongue-and-groove plywood is strong and will reduce squeaks.

What kind of board goes under ceramic tile?

Exterior-Grade Plywood Exterior plywood is an acceptable underlayment for tile and is preferred to interior-grade plywoods because the bonding adhesives used are waterproof. If water seeps through the tile installation to the underlayment, it will not cause the wood to swell, as happens with interior-grade plywood.

What do you put on subfloor before tile?

Pros install backer board on top of a layer of thinset (an adhesive), a process called bedding. The backer board is then secured with screws to the subfloor beneath. An additional layer of thinset is then applied to the surface of the backer board and used to set the tiles.

Is 3/4 subfloor enough for tile?

Tile installed over wood floor systems MUST have a minimum of 1-1/4 inches of solid material beneath it. This means you can have a 3/4 inch wood subfloor covered by 1/2 inch plywood, cement board, or approved gypsum fiber underlayment.

What thickness plywood should I use for flooring?

Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.

Can sheathing plywood be used for subfloor?

Like Sturd-I-Floor, Rated Sheathing may be plywood or OSB. When used as a subfloor, Rated Sheathing typically requires installation of an additional layer of underlayment on top of it before finish flooring can be applied. The underlayment requirements vary depending on the finish flooring.

What is the best plywood for flooring?

Interior plywood is ideal for rooms not exposed to moisture, such as bedrooms, and makes a good subfloor for carpeting, tiles, vinyl, engineered wood laminate flooring and hardwood flooring. Exterior plywood is a better choice for bathrooms, kitchens and any other rooms exposed to water and moisture.

Can you use 1/4 inch cement board on floors?

Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment.

Do I need cement board under floor tile?

Whenever you’re laying tile on a wood subfloor, you need to first install cement backerboard to prevent leaks and water damage that could harm your flooring and the structure of your home. Unlike wood or drywall sub-surfaces, cement backerboard will not rot, warp or grow mold and mildew when exposed to water.

Can you use thinset to level a plywood floor?

Because mortar will stick to the concrete slab and the wood subfloor, and mortar will stick to mortar, then it would only make sense that mortar would work for leveling or patching, right? Well, the answer is actually no. Mortars cannot be used to level or patch a floor – ever!