The Ethernet standard was defined in 1985 by the Institute of Electrical and Electronic Engineers (IEEE) in a specification known as IEEE 802.3. The standard specifies the physical medium, carrier sense multiple access with collision detection (CSMA/CD) access method, and frame format.
Contents
- 1 Which IEEE standard is developed for CSMA CD?
- 2 What is IEEE 802.3 CSMA CD?
- 3 What is the IEEE 802.3 standard related to?
- 4 Which of the following is specified by the IEEE 802.3 10Base2 standard?
- 5 What is the Layer 2 protocol defined by the IEEE 802 standard?
- 6 How many IEEE standards are there?
- 7 What does IEEE 802.1 govern?
- 8 Which of the following IEEE specifications does CSMA CD relate to?
- 9 Which IEEE 802 subcommittee represents the Ethernet standard?
- 10 What is the IEEE 802.11 standard?
- 11 What does IEEE 10 base 5 standard signify?
- 12 Which among the following has been standardized in the IEEE 803 specifications?
- 13 What is 10Base5 and 10Base2?
- 14 What are the main features of IEEE 802.3 Ethernet standard?
- 15 What is the IEEE standard associated with Gigabit Ethernet *?
Which IEEE standard is developed for CSMA CD?
802.3 is a technology that supports the IEEE 802.1 network architecture. 802.3 also defines LAN access method using CSMA/CD.
What is IEEE 802.3 CSMA CD?
IEEE 802.3-2005 – IEEE Standard for Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications.
The IEEE 802.3 protocol standards define the physical layer and MAC sublayer of the data link layer of wired Ethernet. IEEE 802.3 uses Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access at a variety of speeds over a variety of physical media. The IEEE 802.3 standard covers 10 Mbps Ethernet.
Which of the following is specified by the IEEE 802.3 10Base2 standard?
10Base2, which is defined as part of the IEEE 802.3a standard, specifies data transmission speeds of 10Mbps and a total segment length of 185 meters using RG-58 coaxial cable.
What is the Layer 2 protocol defined by the IEEE 802 standard?
802.1. Bridging. LAN/MAN bridging and management. Covers management and the lower sub-layers of OSI Layer 2, including MAC-based bridging (Media Access Control), virtual LANs and port-based access control. This also contains the time-sensitive networking task group.
How many IEEE standards are there?
Often the central source for standardization in a broad range of emerging technologies, the IEEE Standards Association has an active portfolio of nearly 1,200 standards and more than 900 projects under development.
What does IEEE 802.1 govern?
IEEE 802.1 handles the architecture, security, management and internetworking of local area networks (LAN), metropolitan area networks (MAN) and wide area area networks (WAN) standardized by IEEE 802.
Which of the following IEEE specifications does CSMA CD relate to?
Carrier sense multiple access with collision detection (CSMA/CD) is the media access control method of all Ethernet networks. A netowrk is connected following the IEEE 802.3 specifications.
Which IEEE 802 subcommittee represents the Ethernet standard?
IEEE 802 family of standards is maintained by the IEEE 802 LAN/MAN Standards Committee (LMSC). The most widely used standards are for the Ethernet family, Token Ring, Wireless LAN, Bridging and Virtual Bridged LANs. An individual working group provides the focus for each area.
What is the IEEE 802.11 standard?
IEEE 802.11 standard, popularly known as WiFi, lays down the architecture and specifications of wireless LANs (WLANs). WiFi or WLAN uses high frequency radio waves for connecting the nodes. The prominent among them are 802.11, 802.11a, 802.11b, 802.11g, 802.11n and 802.11p.
What does IEEE 10 base 5 standard signify?
10Base5 refers to a standard for Ethernet network technologies that use a thicker version of coaxial cables. It has the capability to transmit data at speed of 10Mbps up to 500 meters using baseband transmission. 10Base5 is also known as Thicknet, ThickWire, thick Ethernet and thick coaxial Ethernet.
Which among the following has been standardized in the IEEE 803 specifications?
Notes: Ethernet is a system for connecting a number of computer systems. It forms as LAN(local area network) with standard protocols. It was standardized in the IEEE.
What is 10Base5 and 10Base2?
10Base5 is nearly identical to 10Base2, except that it uses a different type of cabling and media connector. 10Base5 is known as ThickNet because it uses the RG-8 coaxial cable. It requires an external transceiver to attach to the network interface card on each device. 10Base5 can also use BNC connectors.
What are the main features of IEEE 802.3 Ethernet standard?
This standard defines YANG modules for various Ethernet devices specified in IEEE Std 802.3. This includes half-duplex and full-duplex data terminal equipment (DTE) using either Carrier Sense Multiple Access / Collision Detection (CSMA/CD) or Multipoint Control Protocol (MPCP), and Power Sourcing Equipment (PSE).
What is the IEEE standard associated with Gigabit Ethernet *?
IEEE 802.3 standardized 1000BASE-T1 in IEEE Std 802.3bp-2016. It defines Gigabit Ethernet over a single twisted pair for automotive and industrial applications. It includes cable specifications for 15 meters (type A) or 40 meters (type B) reach. The transmission is done using PAM-3 at 750 MBd.
